The glue machine, as its name suggests, is a machine. The so-called machine is a kind of equipment that can improve the efficiency more than the artificial production of insulating glass.
The two-component glue machine not only solves the above problem of manual glue application, but also greatly improves the speed of the hollow glass glue machine. Under the operation of skilled workers, the working speed of the two-component glue machine is manually applied. Times around.
At present, the insulating glass has two sealing processes, the front is the aluminum frame of the butyl rubber, and the second is the sealing frame of the two-component sealing glue.
In the production of insulating glass, double-pass sealed insulating glass is highly reliable and widely used. The two-component insulating glass glue is coated by two methods of machine coating and manual coating. At present, the production of hand-coated hollow glass is used by most manufacturers due to low cost and low investment.
However, the manual scraping of insulating glass has the following three defects that cannot be avoided:
First, the ratio is inconsistent. 2. Uneven distribution. It is impossible to apply the glue to the insulating glass immediately after mixing, so that it can be cured on the glass to complete vulcanization. The two-component glue machine first satisfies the appearance. Three defects that cannot be avoided when manually hand scraping. At the same time, the glue applied to the edge of the glass by the glue machine is compacted, and the same glue is hand-mixed and applied to the glass to be soft and airy. Just like the concrete structure of cement concrete is shock-shocked, and the concrete without the earthquake can not reach the required strength even if the amount of cement is increased. Therefore, high-standard insulating glass, such as curtain wall hollow, is required to be produced by machine coating.
Machine coating is a better way to avoid the four major defects of manual scraping
At present, the use of the two-component glue machine in the world must be coated with a matching two-component machine, and the machine glue is actually a hand-coated glue that has been thoroughly ground and filtered. This glue has good fluidity and fineness and no impurities. This kind of glue has little relationship with the sealing performance of the glue itself, just to match the operability of the machine. It is the glue that has been finely physically processed. It is also common to block the machine during use. The machine will not work after 10 minutes of construction work in the machine.
About Jinan Lijiang Automation Equipment Co., Ltd.
Lijiang Automation Equipment Co., Ltd. is an enterprise specializing in the research and production of automated insulating glass auxiliary equipment. The products are sold well in domestic and foreign markets and are favored by glass processing enterprises. The company is based on "innovation, integrity" and pursues "professional production, excellence", carefully designed, carefully produced and carefully tested, so that the products have reliable quality assurance. The company has a wealth of professional experience, especially automatic aluminum bending machine, molecular sieve filling machine, semi-automatic aluminum bending machine and other equipment. The company provides customers with quality products and satisfactory services in a sustainable and stable manner. The company is located in the beautiful Spring City---Jinshi West Industrial Park in Jingshi West Road, Jinan City, east to Beijing-Fuzhou Expressway, Beijing-Shanghai high-speed railway, convenient transportation, sincerely welcome domestic and foreign merchants to negotiate business!
For more information, please click: http://fangle.glass.com.cn/
Mesh Pvc Banner
Vinyl Mesh Fabric,Fabric Mesh Banner,Vinyl Mesh Fence Banner,Custom Vinyl Mesh Banner
Anhui LiSheng prinbanner co.,Ltd , https://www.anhuiprintbanner.com